Alexan_e ARMwizard news

What is new in v3.3.0

• Fixed: In LPC11Axx the ADC is powered down by default and has to be powered on before using the peripheral (PDRUNCFG register)
• Fixed: In LPC11Axx the SELCC drop down was empty as default instead of "Clear on ..."
• Changed: LPC_SYSCON->PINSEL to LPC_SYSCON->PINTSEL for LPC11Axx, LPC1315/16/17/45/46/47,
• Added profiles for LPC1224/25/26/27 (48 & 64 pin versions). Note that you can only set CLK_DIV to IOCONFIGCLKDIV0..4 in the I/O settings.

You can download the new version from http://alexan.edaboard.eu

Alex

The were a couple of bugs (introduced in v3.2.0) related to the operation of the pin interrupt list, this is a bug fix release.

What is new in v3.2.1

• Fixed: In WINE (linux) the pin interrupt treeview wasn't behaving properly on clicks
• Fixed: The contents of the pin interrupt treeview were not saved in the sav file

What is new in v3.2.0

• Added profiles for LPC11Axx_(33p) LPC11A11FHN33, LPC11A12FHN33, LPC11A13FHI33, LPC11A14FHN33 (33pin)
• Added profiles for LPC11Axx_(48p) LPC11A12FBD48, LPC11A14FBD48 (48 pin)

What is new in Version 3.1.0


• Fixed: The max operating frequency for the ADC peripheral in LPC175x/6x was 14MHz instead of 13MHz [nxp41306 in LPCware.com]
• Fixed: In the interrupt initalization of Cortex M0 the priority setting is now placed before enabling the interrupt.
• Fixed: The Interrupt priority comment was wrong, the priority level for CortexM0 is 0(highest) to 3(lowest).
• Added profiles for LPC11xx_(33p) LPC11xx33/101, LPC11xx33/201, LPC11xx33/301 (33 pin)
• Added profiles for LPC11xx_(48p) LPC11xx48/101, LPC11xx48/201, LPC11xx48/301 (48 pin)

There was a register setting for PWM missing in the previous version so I have updated to v3.0.1

v3.0.1
• Fixed: For PWM mode of timers (11xx/13xx) the enable bits (3:0) were not set in the PWMC resister [Dirck S.]

I have also created a profile for my mbed LPC11U24 board, this is not included in v3.0.1 but it will be included in the next version, for now you can download it separately.

ARMwizard has been updated to version 3.0

I'm very excited about this new version, I have added several new models that many of you have been asking.
I have also added the pinout images of the new models for quick reference (showMCU button).
If you are using the LPC11xx or LPC12xx then you have to wait a little longer, they will be added soon.

Please note that according to the NXP user manual the reserved bits 7:6 of IOCON have a reset value of 0 for the I2C pins (P0.4 and P0.5) in LPC1311/13/42/43 (this is also the case in the 11xx manual but not the 1315 or 11Uxx).

What is new in v2.2.2

• Fixed: The drop down list contents in several peripheral settings were empty so the peripherals couldn't be set properly (EINT, ADC, Timer, PWM, SPI, SSP).

What is new in v2.2.1

• Fixed: The replace list was saved even when the cancel button was clicked in the "save as" dialog.
• Added: A swap button that can invert the list content, it swaps the old with the new values
• Added: Button to apply the replace operation to an external file

Visit http://alexan.edaboard.eu

Best regards
Alex

ARMwizard is an freeware application created to make the setting of the supported microcontroller peripheral easier through the use of a graphical interface.

The application is windows executable that can work in any windows version and is also fully functional in LINUX using WINE.
The currently version supports the LPC21xx,23xx,24xx,175x/6x,177x/8x.
LPC13xx and LPC11xx will be added in future versions.

The application can currently set the following aspects: