LPCxpert's blog

LPCXpert V2.4: PinMux Tool for LPC1000 & LPC4000 Family of Micro-Controllers

LPCXpert V2.4 is a new release of the Pin Muxing Tool for the LPC1000 and LPC4000 series of devices, with new and enhanced features. This tool now supports about 200 different CORTEX-M0, CORTEX-M3 and CORTEX-M4 based controllers from NXP.

New features include support for the LPC800, LPC1500 and LPC4370 devices. Also Schematic Symbol generation for the ALTIUM Designer and the CADSOFT EAGLE V6.2 is possible.

Bootloader Support

Hi Team,
does there exist a PC Program (i.e. under WIN-7) that allows me to download a binary file (or an ASCII HEX-File) via USB Interface to a LPC1300 target device for ISP. This is to speed up production system programming.

Regards,
Peter

 

 

LPCXpert V2.2: PinMux Tool for LPC1000 & LPC4000 Family of Micro-Controllers

LPCXpert V2.2 is a new release of the Pin Muxing Tool for the LPC1000 and LPC4000 series of devices, with new and enhanced features. This tool now supports about 200 different CORTEX-M0, CORTEX-M3 and CORTEX-M4 based controllers from NXP.

New features include Schematic Symbol generation for the ALTIUM Designer and the CADSOFT EAGLE V6.2. New features also include project generation for IAR Embedded Workbench (EWARM), Keil µVision and GNU C-Compilers, as well as links to Internet Sites for additional information.

LPCXpert V2.02: PinMux Tool Version 2.02 for LPC1000 & LPC4000 Family of Controllers

LPCXpert V2.02 is a new release of the pin muxing tool for the LPC1000 and LPC4000 series of devices, with new and enhanced features and some minor bug fixes.
(Release Date June.20th.2012)

This tool now supports over 150 different CORTEX-M0, CORTEX-M3 and CORTEX-M4 based controllers from NXP.
New features also include Schematic Symbol generation for the ALTIUM Designer and links to Internet Sites for additional information.

LPCXpert V1.1: New Version of PinMux Tool for LPC1800 / LPC4300 (Updated Nov.4th.2011)

LPCXpert is a new version of pin muxing tool for the LPC1800 nad LPC4300 series of devices, with new eand enhanced feature. It is now possible to configure the pins of a peripheral as a set (i.e. for SPI, CAN., I2C, EMC, ETH, ...) and to configure all features of the pins. In addition it is possible, to save up to 8 different configurations and restore from up to 10 different configuration, including pre-configured pin-settings for the HITEX LPC1850 and the Embedded Artists LPC1850 Board.

Syndicate content
feedback