emWin Graphic Library with Graphical User Interface
User & Reference Guide
Document: UM03001
Software version: 5.20
Document revision: 2
Date: March 8, 2013

V1.1 Applied patch by segger to update from V5.20C to V5.20D.
-----------------------------------------------------------------------------------

Introduction

The following formula may be used to calculate a parallel resonant crystal's external load capacitors:
CL = ((CX1 x CX2) / (CX1 + CX2)) + Cstray
where:
CL = the crystal load capacitance
Cstray = the stray capacitance in the oscillator circuit, which will normally be in the 2pF to 5pF range.

Assuming that CX1=CX2 then the equation becomes:
CL = ((CX1 x CX1) / (2 x CX1)) + Cstray
CL = (CX1 / 2) + Cstray
Rearranging the equation, we can find the external load capacitor value:
CX1 = 2(CL - Cstray)

For example, if the crystal load capacitance is 15pF, and assuming Cstray=2pF, then:

emWin图形库图形用户界面手册 简体中文版

本指南介绍如何安装、配置和使用用于嵌入式应用程序的emWin图形用户界面，还将说明软件的内部结构。

Yes. In case of a software reset like WD reset, BOD reset etc, the SRAM contents (memory address 0x1000 0000 to 0x1000 2000 in case of LPC1227 ) is retained. However, the part won't retain the contents if it goes to deep power-down mode or if the microcontrollers is unpowered.

emWin
Graphic Library with
Graphical User Interface
Version 5.16

Manual Rev. 0

This version of the library fixes a problem with name mangling that caused some graphics driver functions to be excluded from IAR builds.

Introduction

Adeneo Embedded LPC32xx WinCE 6.0 Board Support Package (BSP)