|
view |
Is there any port for an NXP Cortex evaluation board that support the .Net Micro Framework? Is NXP or any third party supporting the .NET Micro Framework? |
2012-11-21 15:56 |
|
view |
about the u-boot-2011.06 for lpc1788! |
2012-02-16 10:02 |
|
view |
After a software reset like WD reset, BOD reset, is the SRAM content retained? |
2012-12-04 12:13 |
|
view |
An LPC1751 is programmed using CRP1, but Flash Magic (http://www.flashmagictool.com/) shows the CRP is disabled and can read the memory contents. |
2012-11-19 10:17 |
|
view |
Are the LCD controller signals LVDS? |
2012-11-20 16:17 |
|
view |
Are there any DSP libraries available for the Cortex-M3 microcontrollers ? |
2012-11-27 00:30 |
|
view |
Are there Board Support Packages (BSP’s) available for emWin? |
2012-03-20 09:20 |
|
view |
Are there Ethernet bootloaders available for LPC1700 and LPC2300/2400? If so, where can I find it? |
2012-11-19 10:07 |
|
view |
Are there restrictions with emWin on open source usage? |
2012-03-20 09:18 |
|
view |
Assuming I am using the EMC for both accessing the LCD buffer and external flash, where I have my executable code stored, how will execution time be affected? |
2011-07-14 08:36 |
|
view |
Can I get the emWin source code? |
2012-03-20 09:24 |
|
view |
Can I use emWin as a graphic display library in uCLinux on LPC1788? |
2012-03-20 09:26 |
|
view |
Can the free licensed emWin software be used with NXP MCUs that do not have an LCD controller, i.e. with LCD Panels with their own frame buffers? |
2012-03-20 09:20 |
|
view |
Can the RTC output be used for PLL0 input? |
2012-11-23 04:47 |
|
view |
Can the TC register and MRn register be written to while the timer is running? |
2012-11-23 04:46 |
|
view |
DMAReqSel on LPC17xx indicates UART0/MAT0.0, can both be used simultaneously to trigger a DMA request? |
2012-12-11 15:35 |
|
view |
Do the CAN controllers on LPC17xx have a Time Stamp function ? |
2012-11-27 00:25 |
|
view |
Do the CAN controllers on LPC17xx have a Time Stamp function ? |
2012-11-27 00:25 |
|
view |
Do the LPC17xx and LPC18xx have USB Flash loader like the LPC1343? |
2012-12-11 15:29 |
|
view |
Do the typical Brown-out Detection (BOD) voltages have any tolerance? |
2012-11-23 04:42 |
|
view |
Do you have a secondary USB bootloader for LPC17xx? |
2012-11-19 10:31 |
|
view |
Do you have size limit or memory size calculator to help set the size of the frame buffer? |
2012-11-20 16:28 |
|
view |
Does CRP restrict IAP Flash entry points, i.e. can the application program the Flash even when CRP is enabled? |
2012-11-19 13:18 |
|
view |
Does emWin include a simulator which graphic designer can design without evaluation board? |
2012-03-20 09:27 |
|
view |
Does emWin support Asian/Russian/Greek or other language fonts? |
2012-03-20 09:27 |
English
简体中文
