FAQs found

FAQ link	FAQ question	Last updated
view	Are there Ethernet bootloaders available for LPC1700 and LPC2300/2400? If so, where can I find it?	2012-11-19 10:07
view	What platforms are supported by LPCXpresso?	2012-11-19 13:26
view	Where should I go for LPCXpresso related support?	2012-11-19 13:28
view	Are the LCD controller signals LVDS?	2012-11-20 16:17
view	Do you have size limit or memory size calculator to help set the size of the frame buffer?	2012-11-20 16:28
view	If the LCD controller has a lower priority on the EMC bus, refreshes will be stalled. How noticable is this on the screen?	2012-11-20 16:33
view	Is the LCD DMA a gather scatter DMA ? Where is it located exactly ?	2012-11-20 16:39
view	Is the LCD DMA located in the LCD macrocell or the GP DMA ?	2012-11-20 16:40
view	Is the LPC1788 pin compatible with the LCP2478?	2012-11-20 16:41
view	Is there dedicated on-board SRAM memory specifically for the frame buffer?	2012-11-20 16:42
view	Will using a 16-bit external bus be too slow for LCD, causing tearing to occur?	2012-11-20 16:46
view	The datasheet mentions the I/O pins are 5V tolerant if Vdd is present. Can you explain in detail what this implies?	2012-11-21 16:03
view	The datasheet mentions that the SCL0 and SDA0 pins require external pull-ups regardless of PINMODE / IOCONF / PINSEL configuration. But on SCL1, SDA1, SCL2, and SDA2 look to be able to use an internal pull-up ?	2012-11-27 00:22
view	After a software reset like WD reset, BOD reset, is the SRAM content retained?	2012-12-04 12:13
view	How can I identify the Ethernet MAC ID to differentiate between 23xx/24xx/17xx?	2012-12-11 15:30
view	When using LPC23xx or LPC24xx Rev B silicon, the Ethernet worked fine, however, when we switched to Rev D silicon, the Ethernet interface is no longer working.	2012-12-11 15:31
view	How to calculate the value of crystal load capacitors?	2012-12-21 14:25
view	How is the LPC2478 32-bit External Memory Controller different than the LPC1788 32-bit External Memory Controller?	2013-04-01 13:32

Languages